|
Post by dsouthall on Jul 7, 2016 10:45:47 GMT -8
During the meeting Mike discussed an observed gain wobble. If you are interested in reading into this a bit more you can find the related report of how we found the cause (address below). This report was "finished" before the conclusion was set in stone by the DAQ guys, but essentially the ADC has a tiny resistor that was very temperature dependant. New GRIF-16's will have this problem addressed (either fixed, or at the very least a temperature monitor will be attached for easier correction).
The location of the report is:
/tig/aquila_data1/dsouthall/CleanCode/TemperatureTesting/Temperatures.pdf
I would just upload but the size is ~15MB because there are a lot of pictures.
|
|